Premium Spiral Wound Sealing Gaskets for Industrial Applications
Star product:Spiral wound gasket from Sunwell seals/CG/CGI/IR/R Type
1.Products are manufactured in accordance with all relevant gasket standards.
2.All types of Spiral wound gaskets can be manufactured, CG, CGI, R, RIR, etc.
3.Our production capacity is 150,000 pcs per month.
4.Material combinations for all operating conditions.
Acquired Advantage
SUNWELL SEALS have an annual capacity of 4.5 million gaskets.
Standard finished gaskets and regular components are available in stock.
IQC-LQC-FQC-OQC, ISO9001:2015, ISO 14000, ISO 18000 approved.
125 workers specialize in gaskets producing.
OEM, ODM Acceptable.
SUNWELL SEALS services are constantly being innovated and upgraded in a market where prices are semi-transparent.
Sunwell seals spiral wound gaskets have 4 types:
1.SW600-R Basic Type
Basic construction type, inner and outer diameters are reinforced with several piles of metal without filler to give greater stability and better compression characteristics. - Suitable for tongue and groove, male and female or grooved to flat face flange assemblies.
2.SW600-IR Inner Ring Type
Solid inner metal ring acts as a compression stopper. To prevent accumulation of solids, reduce turbulent flow of process fluids and minimize erosion, damages of gasket between flange bore and the inside diameter, the annular space is filled up by solid inner metal ring. - Suitable for male and female pipe flanges.
3.SW600-CG Outer Ring Type
Solid outer ring accurately locates the gasket on the flange face to give the additional radial strength to prevent the gasket blowout and acts as a compression limiter. In case of installing the outer ring, it is very easy to install the gasket to flange face because the end of outer ring will touch at bolts - Suitable for use with flat face and raised face flanges. For class 900 and above an internal ring is recommended.
4.SW600-CGI Inner & Outer Rings Type
A inner ring and outer ring type gasket will give an additional compression limiting stopper for gasket inner and outer side. It will prevent the corrosions on flange face at annular space. - Suitable for use with flat face and raised face flanges and specified for high pressure / temperature service - Class 900 and above or where corrosive or toxic media are present.
Spiral wound gaskets
Spiral Wound Gaskets (SWG) are widely used as high integrity and sustainable gaskets. SUNWELL SEALS offers a complete range of spiral wound gaskets, Standard and non-standard spiral wound gasket and spiral wound gasket material . SWG can be made from a large selection of alloys and filler materials in a variety of shapes and sizes. SUNWELL SEALS also provide non-round spiral wound gaskets, manhole and handhole spiral wound, and just inner & outer rings for Spiral Wound Gaskets . The gasket is suitable for flange, valve, pump, heat exchange etc.
More information of spiral wound gaskets,please contact with sunwell seals,thanks.
Audited Supplier 
){kind=link}